Spring loaded telescopic length multi-level double bike storage & display stand
- 3 piece pillar
- Height = 80 mm x Width = 1,260 mm x depth : 107mm
- Holds two ( up to four )bikes and can be set up in a room, house or shops
- Adjust the height between 2.1 m to 2.7 m
- The bike cradle can individually adjustable +/- 10 degrees angle and width
- Soft pad protect the bike finish
- Top rubber cup contains a strong spring for secure installation
- Spring loaded system for easy setup
- USD 214.99
- 5.0 kgs
- aluminum / iron / plastic
- Pillar height
- 2,100 mm – 2,700 mm
- Pillar diameter
- 45 mm (upper and bottom) / 40 mm (middle)
- Distance of cradle hook
- Surface of pillar to center of hook : 100 mm
Space of right and left hook : 325 mm – 415 mm
Maximum frame diameter : up to 60 mm
- Maximum capacity
- 25 kgs each cradle
- 1 year
Cautions / About set up
- Select flat floor with no obstacles or items around the area.
- Check the condition and structure of the ceiling.
Cautions / How to hook a bike
- Change the angle of cradle hook to fit the bike frame.
- You may need to hook between the handlebar and seat post when using a mini-velo or kids bike.
- Do not use outdoors or in direct sun light.